English français русский español português العربية 한국의 हिंदी ไทย Việt Nam

Century Xingyi, Never Give Up

Products List

stone floor

                             Stone floor solution


For Marble Floor

I. Materials:

Polishing Machine: Polisher175AE),Vacuum AS60, Dustless cutting machinecutting joints),

Hand polisherpolishing

 

Diamond Pads: 3M buffing padsred+white), Resin pads XY-JLL50#-3000#),

steel woolfor wall and surface waxing, crystallization

 

Polishing chemical: Marble Glue + colorRepair joint), XY-105 crystallization powder, NCL2501/K2 polishing agentMaintenance function

Wax ( for wall only )

 

The other tools: Trowelmixing glue), scraperclear the dust), plastic wrapfinished floor protection), dust mopsurface dust clearance), squeezeesurface water remove), knifescrape out the dust inside the joint ),  Brushes


II.Polishing process

Step 1:Finished floor protection

Before starting the polishing work, cover and protect the finished floor at first.


Step 2:Dry polishing with resin pads HTG-MJ 50#

Dry polishing with resin pads 50# to open the pores


Step 3:Spray stone sealer XY-603

Spraying stone sealer to prevent alkali efflorescence.

Use sprayer to one time, make sure the surface wet for 2-5 minutes, and maintain the floor for 48 hours


Step 4:Cutting&repairing the joints

Open the joints by cutting machine and dig out the dirst inside with knife, then repair the joints with marble glue(pay attention to choose the similar glue color with the floor surface color.


Step 5:Wet polishing with resin pads HTG-MJ 50# 150#

Resin pads rough polishing with grit of 50# 150#


Step 6:Spraying stone hardner MC07

Spraying stone hardner MC07 and keep the surface wet for 20 minutes, and continue the next process after 12 hours.


Step 7:Wet polishing with HTG-MJN 300# 500#


Step 8:Spraying stone sealer XY-603

Spraying stone sealer to prevent alkali efflorescence.

Use sprayer to one time, make sure the surface wet for 2-5 minutes, and maintain the floor for 48 hours


Step 9:Wet polishing with resin pads HTG-MJN 1000# 2000# 3000#


Step 10:Crystallization with XY-105

Doing crystallization with marble polishing powder XY-105 & red polishing mat


For Granite Floor

I. Materials:

Polishing Machine: Polisher175AE),Vacuum AS60, Dustless cutting machinecutting joints),

Hand polisherpolishing

 

Diamond Pads: 3M buffing padsred+white), Resin pads 088-4B50#-3000#),

steel woolfor wall and surface waxing, crystallization

 

Polishing chemical: Glue + colorRepair joint), XY-106 crystallization compound, NCL2501/K2 polishing agentMaintenance function

Wax ( for wall only )

 

The other tools: Trowelmixing glue), scraperclear the dust), plastic wrapfinished floor protection), dust mopsurface dust clearance), squeezeesurface water remove), knifescrape out the dust inside the joint ),  Brushes


II.Polishing process

Step 1:Finished floor protection

Step 2:Cutting the joints

Step 3:Spraying stone sealer XY-603

Step 4:Repairing the joints

Step 5:Wet polishing with resin pads HTG-088-4B 50# -300#

Step 6:Wet polishing with resin pads HTG-088-4B 500#-3000#

Step 7:Crystallization with MC09 and white pads

Step 8:Crystallization with XY-106


 

# #