Safety regulations and precautions for floor construction

In the construction of the floor, there is a very critical thing that surrounds all the construction phases. It is not the lowest level solution, nor is it the application of raw materials. The most critical thing is the hidden danger of construction safety. Floor construction safety measures must be learned from the beginning of the floor construction team entering the site. The elite team of floor construction must implement safety measures at every stage before, during, and after floor construction. Let's take a look at how the elite construction team has taken safety measures.

Electricity safety measures

1. Wiring must be undertaken by full-time personnel and monitored by full-time personnel.

2. Connection without a power plug is strictly prohibited.

3. Machinery and equipment with grounding device regulations must have good grounding devices.

4. If the route of machinery and equipment is damaged, it cannot be applied if it is not solved.

5. It is strictly forbidden to touch the machinery and equipment on the spot.

Avoid fire accidents

1. New decorative materials, adhesives and other flammable raw materials should be stored in a warehouse that is free from open flames.

2. Fireworks are strictly prohibited on the construction site.

3. If the road surface is wet and cold, it must be air-dried. It should be sprayed on the epoxy floor before the raw materials enter the spot.

Avoid flammable vapor damage

1. New decorative materials and adhesives should be stored in a closed manner.

2. The portable agitator at the construction site should be used in a cool place outside the site.

3. The application of electric grinders on the spot must be carried out under the conditions of dry roads and natural ventilation in the natural environment.

Other security measures

1. Remove dirt on the road surface, ensure the safety passage is unobstructed, and avoid injury caused by falling over.

2. Keep water on a quiet road or set up grass mats to prevent injuries from falling.

3. In winter construction, the working temperature of the construction site should be ensured to avoid safety production accidents caused by excessive wearing and inconvenient actual operation.

4. Pay attention to heat reduction during summer construction, and pay great attention to avoid the damage of volatile vapors in spraying new projects. Rotating work hours should be reduced.

5. Lighting fixtures with sufficient chromaticity should be ensured during night construction.

6. Drunk construction is strictly prohibited.

7. Construction with diseases is strictly prohibited.

8. It is strictly forbidden to work day and night and the staff tired due to the tight schedule.