Why do some floors need to splash some water when curing?

The platinum crystal floor system is a construction process of dry grinding throughout the process, but many people like to splash some on the ground in actual construction, and then grind it. Why does this phenomenon occur? Platinum New Materials summarizes it for you What time is it:

The ground is a bit hard, and splashing some water can make it grind faster, because splashing water can cool the cutting head during grinding and increase the cutting force of the cutting head, so that the ground can be ground faster.

Some black blocks will appear in the process of grinding and leveling the ground, which is not easy to grind off. It is easier to grind by splashing some water. The principle is the same as the above.

Sprinkle some water on the ground, you can see the degree of exposed aggregate on the ground, so as to avoid the ground effect after the completion of the construction is different from what you expected.

Some projects are not used with industrial vacuum cleaners, and a large amount of dust will be generated on the construction site. For the sake of human health and construction convenience, splashing some water on the ground can make the dust settle on the ground and reduce the dust.

It is recommended that a floor grinder (Xingyi HTG800-4A driven floor grinder) and an industrial vacuum cleaner (HTG-IVC550 large industrial vacuum cleaner) with a dust cover can be equipped in the construction of the platinum crystal floor, then it can be compared To the greatest extent possible to achieve dust-free grinding.