Winding method of the electric wire during construction of concrete floor grinder

In the construction process, if you want to do the floor work more efficiently and safely, you also need to pay attention to the working wires of the concrete floor grinder. The wires are very long. If they are placed on the ground randomly, the machine will be easily touched back and forth. Therefore, in the working process of the ground grinder, the winding method of the wire is particularly important, which can greatly improve your work efficiency and improve your safety in use. Xingyi Machinery will give you a trick. The specific operations are as follows:

1. Plug in the external power supply;

2. Pass the power cord through the swing lever handle;

3. Wrap the power cord at least two turns on one side of the handle;

4. Pull the power cord slightly to ensure that the power cord has enough friction to make the power cord firmly fixed on the handle.

Precautions:

1. Ensure that the power plug and socket are firmly connected;

2. Before plugging in the power plug, make sure that the emergency stop has been pressed and other switches have been reset;

3. Please use the power cord according to the minimum specification of the wire;

4. Please use the correct power supply.

In addition, the grinding method of the concrete floor grinder also affects the placement of the wires. The best grinding line is to grind the ground according to the "#" character when grinding the ground so that the grinding effect will be better. . When grinding the ground according to #, the direction of the grinder should be such that the wire is pulled farther and farther, so as to further prevent the wire from interfering with the normal operation of the floor grinder.

In the construction process, if you want to do the floor work more efficiently and safely, you need to pay attention to it. If you are still worrying about the working wires of the floor grinder, don’t give it a try, the floor construction will become more and more efficient, and you don’t have to worry about the wires being caught in the machine or the randomly stacked wires that trip people.