• 2021-09-20

 Happy Mid-Autumn Festival The Mid-autumn festival is approaching. Happy Mid-autumn festival to you. Mid-Autumn Festival, also known as the Moon Festival or Zhongqiu Festival is a popular lunar harvest festival celebrated by Chinese and Vietnamese people. The moon festival is celebrated on August 15 of the lunar calendar. Is one of the most traditional of Chinese holiday. The Mid-Autumn Festival began in the early years of the Tang Dynasty, more than 1,300 years ago. Since ancient times, the Mid-Autumn Festival has had customs such as worshipping the moon, admiring the moon, worshiping the moon, eating moon cakes, admiring osmanthus, drinking osmanthus wine, and other customs, which have been passed down for a long time. The Mid-Autumn Festival uses the full moon to signify the reunion of people. It is a rich and precious cultural heritage for yearning for the hometown, the love of loved ones, and praying for a harvest and happiness. Here to share the story and legend about the Mid-Autumn Festival： According to Chinese mythology，the earth once had 10 suns circling over it. One day，all 10 suns appeared together，scorching the earth with their heat. The earth was saved when a strong archer，Hou Yi，succeeded in shooting down 9 of the suns. Yi stole the elixir of life to save the people from his tyrannical rule，but his wife，Chang-E drank it. Thus started the legend of the lady in the moon to whom young Chinese girls would pray at the Mid-Autumn Festival. Finally, ，Xingyi wish a happy Mid-Autumn Festival, one more round full moon！

• August 31, 2021

Leveling techniques for stone renovation and leveling Many people like to use stone to pave the ground, but in the paving process, there is a problem of height difference due to lack of attention. The flatness of the entire ground is not good, so you need to use a floor grinder to refurbish and grind the stone. Smooth. In the process of stone renovation, how to control the flatness of the ground is skillful. One, start from the gap The deformation and warpage of the stone are generally concentrated in the gaps, and it is easy to appear that the gaps are higher than the surroundings, and the ground should be ground and leveled from a high place, otherwise if it is laid side by side, the thickness of the board will be easily cut off, and the height difference Actually it has not been resolved. Therefore, after cutting the seam to repair the glue and brushing the protection, first use a concrete floor grinder to cross and smooth the gap. Second, when you encounter a cut, you have to flatten it before you can move forward. In the process of flattening the gap, the machine vibrates and the grinding disc collides with the cutting edge. At this time, slow down the walking speed of the ground grinder and operate the machine fan-shaped swing until the jitter and sound disappear, that is, the height difference has been eliminated. Smoothing and then moving forward is very important for the overall flatness quality. Three, overall grinding treatment After dealing with all the height differences in the gaps and cuts, the large-area grinding treatment can be formally carried out. Moreover, in this Gu Chengzhong, the leveling must be done at one time, and each grinding and leveling must be handled well. You cannot hope for the next grinding, because if the foundation is not laid in the front, the subsequent leveling will be more difficult, and it may not be able to be polished.  The above are some matters that need to be paid attention to in the process of stone renovation and leveling. Mastering these points will reduce the chance of error during stone renovation and leveling.

• 2021-08-31

What kind of floor grinder to choose for the renovation of the old epoxy The epoxy floor is beautiful and clean, rich in color, bright, and dust-free, but the epoxy floor is less wear-resistant than the emery floor and has a shorter service life. It is easy to be damaged under heavy pressure and external force. Scratches, peeling, shedding, sanding, and dusting of the base surface are caused. However, the old epoxy floor with large area damage in China is waiting to be processed. At the moment when the curing process is vigorously promoted, after continuous practice, the old epoxy reforming and curing can effectively solve the problems faced by the epoxy, and it has become A trend. In the process of refurbishing the old epoxy into a solidified floor, the intelligent floor grinder HTG-800-4A was selected for construction. The operation is easy and the effect is good, and the construction efficiency is improved, and the cost is reduced. Construction advantages of floor grinder HTG-800-4A: 1. Heavy weight and strong cutting force. The weight of 800-4A is as high as 540KG, and it is equipped with 2 three-grade weighted irons of 30KG each. The cutting force of the machine is sufficient, so you are not afraid of grinding. 2. The labor intensity is reduced and the construction efficiency is improved. Floor grinding machine 800-4A can walk and grind autonomously, without relying on manual push, and there is no need to worry about the problem of the machine being pushed too hard or too tired, greatly reducing the labor intensity of the workers, the operation is easier, and the workers' enthusiasm It will also increase, so the construction efficiency will naturally increase accordingly. 3. Precise grinding, good construction effect. The floor grinder HTG-800-4A has a fixed-speed cruise function, which can freely adjust the walking speed within 0-25m/min. As long as the parameters are set, different operators can also achieve consistent ground grinding results and precise grinding Make the ground effect more even.

• 2021-08-25

New Ceramic Matrix Composite Abrasives (CMC ) Characteristics of ceramic matrix composites: 1. High strength, good toughness, wear resistance and impact resistance; 2. Lighter weight, high temperature resistance and corrosion resistance 3. It has the advantages of ceramic materials and resin materials, and is more widely used. Features of the new ceramic matrix composite pads: 1. High strength, impact resistance during grinding, not easy to crack or break; 2. High temperature resistance, suitable for the whole process of dry grinding on the floor, without burning chips and corroding the ground; 3. Sharp and durable, with excellent self-sharpening properties, keeping sharp for a long time;  4. Perfect grinding effect, fine ground scratches, 3 processing steps reduced, and easy to repair the scratches.

• 2021-08-23

TANK-1500 ride on grinding machine is on sale TANK-1500 ride-on grinding machine is on sale, hurry up and buy it!

• 2021-08-20

HTG driven floor grinder construction makes the ground smoother and better Choosing a good floor grinder depends on price, quality, and functions. It also depends on the ground effect it makes. Whether the ground effect is good or not, the flatness of the ground is a very important factor to measure. In the practice of continuous floor construction, the HTG driven floor grinder has shown that the ground effect is very good, and the customer is very satisfied. 1. HTG driven floor grinders are heavy in weight, strong enough in cutting force, and have high grinding and leveling efficiency for uneven ground. 2. The working area of the HTG driven floor grinder is large, which is conducive to the grinding of uneven ground. 3. HTG driven floor grinder is a four-head planetary counter-rotating grinding method. It grinds evenly, has stronger grip, and more stable control. It prevents the machine from shaking too much on uneven ground and difficult to control. 4. HTG driven floor grinders can walk and grind autonomously, and can freely adjust the walking speed and grinding speed. Different operators can also achieve consistent grinding results, avoiding subjective influence of people, resulting in uneven ground grinding and different depths. One. To ensure the smoothness of the ground, use a HTG driven floor grinder, and the ground effect after treatment is good.

• 2021-08-18

Such a strong and durable high-speed polishing machine The starting point for the liberation of labor-Xingyi HTG 700 HP high-speed polishing machine. The 700HP's body weighs as high as 208kg, breaking the upper limit of the industry's high-speed polishing machine. Under heavy pressure, the polishing is better. Such a weight has inherent advantages in terms of durability. In addition to the weight, the HTG 700HP machine has a strong IP55 protection level and can be used with confidence, and the defensive force of the lever; the unique shock absorption design prevents the belt from breaking, which is especially beneficial to the polishing of uneven ground. The overload capacity of the 9.5KW high-power motor is 1.5 times that of the ordinary motor, and the energy consumption of the motor is 70% of that of the ordinary motor. Centralized control panel, convenient and labor-saving. Today, when technology is the primary productive force, Xingyi Technology is chasing the forefront of the industry and dare not relax! Choose Xingyi, choose technology, and move towards the future!

• 2021-08-12

Floor grinding and edging sacred artifacts In floor grinding, no matter the area of the grinding project site is large or small, the problem of edge grinding against the wall always troubles the floor people. The large grinder grinds against the wall, just like wielding a blue dragon and a moon knife in a small alley-a good knife is hard to use. For corner grinding, small grinders and edging machines with lighter weight are generally used. Xingyi HTG-250VS edging floor grinder has a light body, good cutting force, and the level of the body can be adjusted. When edging, the light body makes the operation simple and convenient, and the powerful cutting force grinds the ground smoothly，smooth. Xingyi HTG-S250 edge floor grinding machine is easy to operate and has a very low failure rate. Good machine quality can better guarantee the efficiency of engineering construction. The driven edging machine liberates the labor force. The construction workers can operate the machine while observing the environment to make the grinding and edging effect better. It is easy and efficient to ensure the construction progress and improve the quality of the project.