800-4A Productive Self-propelled Diamond Floor Grinder And Concrete Polisher

800-4A Productive Self-propelled Diamond Floor Grinder And Concrete Polisher

The 800-4A is an ideal self-driven floor surface grinding  and polishing machine, which subverts the traditional floor working mode. Equipped with international brand WEG motor and inverter, it is of the strong power and stable performance in any job site. There is a cruise control system in the machine, which realize the accurate and uniform grinding effect. The walking speed can be adjusted freely from 0-25m/min. The grinding speed can be set standardly for the operators, even different workers can achieve relatively consistent grinding effect even at different times. The effect will not be affected by human subjectivity. Equipped with the self-propelled system and a set of supporting wheel, it can be transported conveniently with heavyweight. If you are searching for a labor-saving and high-efficiency floor grinder, then the 800-4A would be the right choice.

Specifications

FAQ

Q1:

How do you use a diamond floor grinder?

A1:

Q2:

how do you maintain a floor grinder?

A2：

1. Clean the grinder every day after work, especially the dust on dust skirt and grinding plates.

2. Clean the water tank every week to prevent the dust blocks the filter.

3. After finishing each job site, all bolts and grinding plates need to be checked and fasten.

4. If the machine is often used in dry grinding, then the cooling fan of inverter need to be cleared every 20-30days.

5. Replace the gear oil termly. Usually, a new floor grinder needs to replace the gear oil after six months of use. Later, the gear oil needs to be replaced once a year.

6. Ask professional technician to do the machine maintenance and record the content of maintenance.

Email: [email protected]
Skype: xingyistone15
Whatsapp: 008615960788815