• 2021-08-31

What kind of floor grinder to choose for the renovation of the old epoxy The epoxy floor is beautiful and clean, rich in color, bright, and dust-free, but the epoxy floor is less wear-resistant than the emery floor and has a shorter service life. It is easy to be damaged under heavy pressure and external force. Scratches, peeling, shedding, sanding, and dusting of the base surface are caused. However, the old epoxy floor with large area damage in China is waiting to be processed. At the moment when the curing process is vigorously promoted, after continuous practice, the old epoxy reforming and curing can effectively solve the problems faced by the epoxy, and it has become A trend. In the process of refurbishing the old epoxy into a solidified floor, the intelligent floor grinder HTG-800-4A was selected for construction. The operation is easy and the effect is good, and the construction efficiency is improved, and the cost is reduced. Construction advantages of floor grinder HTG-800-4A: 1. Heavy weight and strong cutting force. The weight of 800-4A is as high as 540KG, and it is equipped with 2 three-grade weighted irons of 30KG each. The cutting force of the machine is sufficient, so you are not afraid of grinding. 2. The labor intensity is reduced and the construction efficiency is improved. Floor grinding machine 800-4A can walk and grind autonomously, without relying on manual push, and there is no need to worry about the problem of the machine being pushed too hard or too tired, greatly reducing the labor intensity of the workers, the operation is easier, and the workers' enthusiasm It will also increase, so the construction efficiency will naturally increase accordingly. 3. Precise grinding, good construction effect. The floor grinder HTG-800-4A has a fixed-speed cruise function, which can freely adjust the walking speed within 0-25m/min. As long as the parameters are set, different operators can also achieve consistent ground grinding results and precise grinding Make the ground effect more even.

• 2021-08-25

New Ceramic Matrix Composite Abrasives (CMC ) Characteristics of ceramic matrix composites: 1. High strength, good toughness, wear resistance and impact resistance; 2. Lighter weight, high temperature resistance and corrosion resistance 3. It has the advantages of ceramic materials and resin materials, and is more widely used. Features of the new ceramic matrix composite pads: 1. High strength, impact resistance during grinding, not easy to crack or break; 2. High temperature resistance, suitable for the whole process of dry grinding on the floor, without burning chips and corroding the ground; 3. Sharp and durable, with excellent self-sharpening properties, keeping sharp for a long time;  4. Perfect grinding effect, fine ground scratches, 3 processing steps reduced, and easy to repair the scratches.

• 2021-08-23

TANK-1500 ride on grinding machine is on sale TANK-1500 ride-on grinding machine is on sale, hurry up and buy it!

• 2021-08-20

HTG driven floor grinder construction makes the ground smoother and better Choosing a good floor grinder depends on price, quality, and functions. It also depends on the ground effect it makes. Whether the ground effect is good or not, the flatness of the ground is a very important factor to measure. In the practice of continuous floor construction, the HTG driven floor grinder has shown that the ground effect is very good, and the customer is very satisfied. 1. HTG driven floor grinders are heavy in weight, strong enough in cutting force, and have high grinding and leveling efficiency for uneven ground. 2. The working area of the HTG driven floor grinder is large, which is conducive to the grinding of uneven ground. 3. HTG driven floor grinder is a four-head planetary counter-rotating grinding method. It grinds evenly, has stronger grip, and more stable control. It prevents the machine from shaking too much on uneven ground and difficult to control. 4. HTG driven floor grinders can walk and grind autonomously, and can freely adjust the walking speed and grinding speed. Different operators can also achieve consistent grinding results, avoiding subjective influence of people, resulting in uneven ground grinding and different depths. One. To ensure the smoothness of the ground, use a HTG driven floor grinder, and the ground effect after treatment is good.

• 2021-08-12

Floor grinding and edging sacred artifacts In floor grinding, no matter the area of the grinding project site is large or small, the problem of edge grinding against the wall always troubles the floor people. The large grinder grinds against the wall, just like wielding a blue dragon and a moon knife in a small alley-a good knife is hard to use. For corner grinding, small grinders and edging machines with lighter weight are generally used. Xingyi HTG-250VS edging floor grinder has a light body, good cutting force, and the level of the body can be adjusted. When edging, the light body makes the operation simple and convenient, and the powerful cutting force grinds the ground smoothly，smooth. Xingyi HTG-S250 edge floor grinding machine is easy to operate and has a very low failure rate. Good machine quality can better guarantee the efficiency of engineering construction. The driven edging machine liberates the labor force. The construction workers can operate the machine while observing the environment to make the grinding and edging effect better. It is easy and efficient to ensure the construction progress and improve the quality of the project.

• 2021-08-10

Suitable for small area floor construction vacuum cleaner Nowadays, more and more attention is paid to environmental protection, and floor construction is also paying more attention to the creation of a dust-free and healthy working environment. Basically, dry grinding is used for construction, and each floor grinder will be equipped with an industrial vacuum cleaner. Achieve dust-free grinding and get rid of the trouble of dust. Floor construction realizes dust-free grinding. Choose HTG-IVC-55A to be used with a floor grinder, which has high power, strong suction, and high dust removal efficiency. However, the HTG-IVC-55A is a large industrial vacuum cleaner, suitable for large-area projects. The area is too small, and it will be difficult to turn around. It is not convenient. The portable HTG-IVC F-65L is more suitable. The body is light and can be connected. The floor grinding machine is used simultaneously. Advantages of HTG-IVC F-65L: 1. The sturdy steel barrel and metal frame are more resistant to impact and durable; 2. The appearance is small and exquisite, convenient for transportation, 490mm*650mm*1000mm; 3. Equipped with a strong silent motor, the dust collection efficiency is higher, and the service life is longer, which is more than three times that of the ordinary commercial vacuum cleaner motor; 4. The standard H-grade filter has a large filtering area and can effectively filter 99.9% of 0.3μm dust particles; 5. The manual filter vibrating screen makes the cleaning of the filter easier and time-saving; 6. Equipped with a patented lever lifting mechanism, and the dust collecting bucket is detachable, which is convenient for dust disposal; 7. Equipped with universal industrial casters and humanized push-pull handles to facilitate the movement of the vacuum cleaner. If the construction area of the project is small and you are worried that the industrial vacuum cleaner is too large and troublesome to carry, you can use this portable industrial vacuum cleaner to make the construction more convenient!

• 2021-08-05

The floor polishing machine is unstable and the effect is not good, you can use HTG-HP-27S to deal with The solidified floor construction needs to be polished, and the floor needs to be treated with a floor polisher and a concrete protector. During the polishing process, many customers reported that the use of the machine is not easy to operate, also because the floor polisher The problem of unstable control results in poor polishing efficiency and effectiveness of the ground. Regarding the unstable control of the polishing machine, Xingyi Machinery has continued to develop and innovate, and the new floor polishing machine HTG-HP-27S has improved a lot compared to the previous one. It is equipped with a dynamic balance system and the control of the machine operation. Good, easy for construction personnel to operate. In addition, the 12.5HP high-power motor and the 27-inch working width make the polishing efficiency of the floor polishing machine better and the light output faster!

• 2021-07-22

Newest heavy-duty floor grinders Two products were launched: Topotent 955LE and Tank1500 Tech inside, art outside, more than heavy, more than quick Potent, heavy-duty, and high efficiency for your big project