• November 09, 2020

The grinding work in surface of ramp floor is very laborious. When a heavy grinder is working on a ramp,  it needs several people to control and assist the operation. The grinder may slide down the ramp as a distraction from the operator, which is full of danger and labor-intensive. The HTG-800-4A self-propelled floor grinder from Xingyi has strong power and can grind on uneven ground, providing a stable foundation for uphill walking. With the combination of its own sensor and control chip, the machine can achieve a constant speed cruise. Whether uphill or downhill, one person can grind by himself. The walking speed can be adjusted freely from 0-25m/min, and different workers can achieve a relatively consistent grinding effect. The climbing ability is not only reflected in the construction but also solves the transportation problem of the heavy grinder. HTG-800-4A can easily overcome the difficulties of other similar grinding machines working on slopes. Fujian Xingyi Polishing Machine Co., Ltd's mission is to "make global floor labors to work with health and happiness". Choose Xingyi and embrace technology!

• November 03, 2020

Intelligent AI, as the accomplishment of science and technology, has gradually entered people's lives, from mobile phones to spaceflight, bringing convenience to mankind. Xingyi also followed the pace of development and took the lead in bringing AI into the grinding machine, striding into a new era of intelligent construction. The pioneer floor grinder-Hummer 850LE has an AI wireless intelligent system, which can automatically collect the operating data information of the operator, and record the collected data to the cloud. When the operator needs to operate, he can use the cloud big data to set the best operation mode for himself and improve the machine. Work efficiency when turning, correcting deviation, and turning around. With an advanced servo dual-drive system, keeping up with the pace of technology, it has stronger power and more flexibility. Choose 850LE and Xingyi to add another force to efficient construction.

• August 05, 2020

The choice of sprayer Sprayer is the abbreviation of spray equipment. The sprayer is an appliance that uses air suction to turn medicine or other liquid into mist and spray it on other objects evenly. It is composed of a compressed air device, a narrow tube, and a nozzle. According to the power form, sprayers can be roughly divided into three categories: manual, electric and motorized. With the continuous development and progress of science and technology, some new types of sprayers have emerged in recent years. For example, the manual sprayer family has a high-pressure self-locking automatic sprayer, whose work efficiency is comparable to that of the knapsack motorized sprayer; the motorized sprayer family has been added. : Hand-push, vehicle-mounted, stretcher and other highly professional sprayers have irreplaceable advantages under specific working conditions. Sprayers are generally used in agriculture, but there are also some portable small sprayers that are widely used in households, such as gardens, kitchens and other places. Especially in the current global epidemic situation, the disinfection and prevention of various indoor and outdoor public places has become an indispensable work every day, and the use and demand of sprayers have doubled. The carrying of static electricity is also an important factor for sprayers. With the electrostatic sprayer under the same operating time, the density of droplet coverage is higher, the adhesion is stronger, and the efficiency can be improved. The non-static sprayer is inferior in comparison, but if it is operated well, it can achieve similar results, and it is more advantageous in price than the static-charged model. The type of sprayer is also divided into direct current (DC) and alternating current (AC). Direct current is what we commonly call the style with battery and built-in charging board. It is easy to carry, flexible to use, suitable for outdoor environments without power, but it is expensive, much higher than the AC style. The AC version, that is, plug-in sprayer, although there are requirements for power conditions, most manufacturers of sprayers, the plug type can be replaced, the length of the wire can be extended, and it can fully meet the daily applications in various indoor places. And there is no built-in battery, the weight is lighter, the price is low, and for most consumers, the price is outstanding. The Sprayers of KB-15002E, it is specially applied for large area spraying operation of greenhouse. It can also be used for Public sanitation and disinfection, such as airports, docks, hotels, restaurants, hospitals, public transport, theaters, communities, entertainment. As well as food processing, pharmaceutical companies, animal husbandry industry's disinfection and sterilization, health and epidemic prevention. KB-15002E 110V/220V 12L 3m 1400w 0-50 μm (Adjustable) 6-8m 5kg 44*23*49cmCM 540 1290 120

• July 29, 2020

1: Under what circumstances is the chiseling, milling and planing integrated machine used? Answer: Mainly used for picking, repairing, refurbishing and secondary strengthening of highways, high-speed railway bridge decks and box girder concrete surfaces. If the indoor floor is made high, you can also use it to mill out the high part, as well as anti-skid chipping treatment of marble granite, road zebra crossing removal, floor renovation and old coating cleaning. Note: Generally it is concrete floor, epoxy; elastic ones are not easy to use 2. What is the depth of milling, chiseling and grinding? Answer: The milling depth of ordinary concrete (C25) can reach 15mm at one time, and the milling depth of high standard concrete (C50) can reach 10mm at one time. The normal speed of C25 concrete is 3-5mm in the past, and 15mm is slow. 3. How many square meters can be used for a set of alloy blades per day? How many squares can be chiseled a day? Answer: A set of alloy cutter heads for ordinary concrete (C25) can chisel 4000-5000㎡, and a set of alloy cutters for high-standard concrete (C50) can chisel 1000㎡ a day. Depth 3-5mm 4. How many square meters can a set of alloy cutter head use for milling a day? How many squares can be milled in a day? Answer: The life of the milling machine has a lot to do with the depth of the milling and the marking of the concrete. The actual data is difficult to measure. If calculated according to the 10mm depth of ordinary concrete (C25) milling, an average set of alloy wheels can process about 1500-2000㎡. 300-500 square meters a day. 5. Are there different alloy cutter heads to choose from according to different ground conditions? Answer: Strictly speaking, it is indeed necessary to choose different alloy wheels according to the different ground conditions, but this undoubtedly increases the difficulty for the operator to use the equipment. Many operators cannot distinguish which alloy wheels are most suitable for which ground. Not a professional. As a manufacturer, the alloy wheels we shipped from the factory have undergone repeated tests. Finally, based on actual results, we have selected the set of alloy wheels that are suitable for various complex grounds and have better processing effects and are durable. This is the alloy wheel that we configure for customers at the factory. (If the ground hole is larger, use an alloy wheel with a larger gap, and use an alloy wheel with a smaller gap if it is thinner)

• July 15, 2020

In order to solve the problem of floor people dealing with the details of corner grinding, Xingyi Machinery combined with more than ten years of floor technology experience, constantly reforming the grinding machinery, so as to introduce the HTG-250 series grinding machine. This grinder has a working area of 250 mm, which can be used not only as a corner and step grinding, but also as a small-area ground grinder. https://www.xy1118.com/China-concrete-floor-grinder-and-Polishing-Machine-HTG-250VS_p255.html The grinder is small but light, with sufficient power and can reach more than 3 horsepower; the bottom adopts a semi-square arc shape, which perfectly fits the corners and corners; in addition, the chassis uses three disk planets, using gears to rotate, Even grinding to create a flatter ground for customers; adjustable handles, convenient for customers to operate the machine and control its direction; the motor uses the WEG brand of the world's three largest motor manufacturers, quality and power are guaranteed, and it can be guaranteed for 1 year globally . The HTG-250 series is divided into HTG-250VS and HTG-250. The main difference is that: 250VS has a built-in inverter, which can adjust the speed of the machine. When the voltage is too high, it can automatically power off to protect the motor, thereby extending the machine. Service life. Each HTG-250 series grinder can be equipped with metal abrasive discs and resin abrasive discs at the bottom. The metal abrasive discs are attracted by magnets, and there are three hooks in the middle to catch the three holes of the metal abrasive discs; the resin abrasive discs are glued, whether it is metal or resin abrasive discs, they are very strong, Make sure that it does not come off during the grinding process. In addition, the hole design of Xingyi Machinery's metal abrasive discs is internationally applicable, which also shows that customers who purchase our grinding machine can install various metal abrasive discs and all adhesive resin abrasive discs that comply with international standards. When customers urgently lack grinding plates, they can get replacement grinding plates quickly. If you buy an HTG-250 series angle grinder, you need to know that it is not only used on cement floors, but can also be used on many types of floors, such as cement floors, granite, terrazzo, marble, and epoxy floors. It has become an indispensable machine in the floor project. It can be used with the vacuum cleaner IVC-F65L, which can effectively reduce the dust generated in the work and protect the floor workers' lungs. In addition, this angle grinder can be used not only in industry and commerce, but also as a home. For home use, its nature becomes a stone polishing care machine, because its grinding power is stronger, so its efficiency is not lost to the crystal plane machine, and the polishing effect is significantly visible. In order to bring customers a better experience, in order to make the floor technolog...

• December 31, 2019

The era is moving towards intelligence. Intelligent products are gradually becoming universal in our lives. Xingyi Machinery is also continuously developing and innovating. It has developed a new generation of intelligent floor grinders with self-propelled and remote controls. Full-automatic floor grinder with a wide range of product types. Among them, HTG-700A is a square self-propelled floor grinding machine with easy operation. It can reduce the labor intensity and improve the construction efficiency. Advantages of Driven Floor Grinder HTG-700A: 1. With self-propelled system, it can walk and grind independently, reduce labor intensity and improve construction efficiency; 2. Equipped with battery,is easy for transportation; 3. Three-level counterweight,three-level grinding pressure ,can be adjusted according to the ground conditions and grinding depth; 4. Constant speed cruise, through parameter setting, different operators can achieve the consistency of grinding effect; 5. Optional water tank to achieve dry and wet working modes

• December 28, 2019

In the flooring industry, there are stone caring and concrete floor construction. The demand for dual-purpose floor grinding machines that can be used for floor surface grinding and stone renovation is increasing. However, current floor grinder is either too small to be used for floor grinding with low efficiency, or is too big to be suitable for stone refurbishment. In this situation, XY 600-4I is a floor grinder machine that is very suitable for both concrete floor and stone refurbishment. Xingyi floor grinding machine XY 600-4I is a medium-sized machine, its weight is 518lbs, and it is equipped with 66lbs weight iron, working width 600MM, motor and inverter both are 10HP, and the speed can be adjusted from 350-1680 rpm.It's ideal for both concrete and stone floors. 1. The gear box is made of aluminum alloy castings with long service life; 2. Integrated gear box design to improve grinding efficiency; 3. Folding handle, convenient transportation and convenient operation; 4. The four grinding discs and 12 grinding heads run crosswise, and the floor grinding is more uniform; 5. Multifunctional grinding discs can be installed with various grinding consumables to reduce construction costs as much as possible; 6. It can be equipped with a dust suction device to make a dust free working environment 7. Suitable for both wet and dry grinding and polishing.

• December 16, 2019

In High Tech Grinding concrete polishing system, in addition to professional technology, good equipment and materials, and construction expert,there is also a very important tools, that is, the use of detection equipment for the floor surface survey to make a concrete construction plan according to the actual situation on the floor. The seven testing instruments of the High Tech Grinding concrete polishing system include: ① Mohs Hardness Pen: measure the hardness of the floor surface. ② Rebound Hammer: measure the strength of the floor. ③ Gloss Meter: measure the brightness of the floor. ④ Water Meter: measure air humidity. ⑤ Diastimeter: measure the distance on the floor. ⑥ Empty Drum Hammer: Measure the empty drum on the floor. ⑦ Wedge Feeler: measure the flatness of the ground. Using these seven testing instruments to measure the ground data before and after the floor is cured, forming a comparison before and after, is a major factor in determining which construction plan to take, and it is also a direct evidence of whether the polishing process can effectively solve the floor problem.