• November 24, 2020

  A worker must first sharpen his tools if he wants to do his job well, and a lot of good equipment is needed to make a solid floor.   To be like grinding the ground into a mirror, a good "grindstone" is indispensable. the HTG-800-4A self-propelled floor grinder is a piece of good equipment for polishing the floor. The powerful power can also walk on the ground on irregular floors; the four-headed planets counter-rotating the grinding disc, even if it is as solid as a rock; It is easier for people to free themselves from machines. What should I do if the dust is flying when I grind the ground? Xingyi HTG-IVC55A automatic industrial vacuum cleaner and HTG-800-4A floor grinder are matched with each other to achieve dust-free construction during the work process to protect the health of employees. The finished floor is finally applied with an HTG-700-HP high-speed polishing machine to add a protective layer to the floor, making it smoother, shinier and more durable.    Xingyi makes floor work easier and happier.

• November 17, 2020

The floor industry has the characteristics of high labor intensity, complex and changeable construction environment, and open-air operation. Work-related accidents occur from time to time. It is very important to pay attention to the details of the construction process. Xingyi people summarize the following details based on the actual process: 1. The floor grinder must be driven by electricity. The wire has become a major obstacle on the construction site. The layout of the wire will affect the construction efficiency. When grinding the ground, you should grind the ground according to the # character, which is more convenient for grinding. When grinding the ground according to the # character, the direction of the grinder should be such that the wire is pulled farther and farther, so as to further prevent the wire from interfering with the normal operation of the grinder. 2. Remote control driven floor grinder, a remote control can easily control the mechanical work. Please reset the button before use. Make sure that the power of the remote control is at least 20% during the grinding operation. The grinding route should avoid the wire to avoid accidents. 3. During the grinding process, the abrasive needs to be replaced according to different situations. Before changing the abrasive, be sure to press the emergency stop switch of the remote control. After tilting the device, ensure that the device is parked smoothly. Pay attention to safety during the ground grinding construction process to protect life and health. Start with small things and start now.

• July 15, 2020

The violent novel coronavirus hit all industries badly, and the global economy irresistibly experienced a major recession. There has been paused even fallen with the growth of economy yet, but there still have backed to normal gradually since reopening. One of the latest study shown which it is expected the polishing machine industry still will grow at a compound annual growth rate of around 2.2% in the five years, and the marketing will expand to 3 billion US dollars by 2023. Different kinds of floors polished are expanding to market, which including cement-cured floors, epoxy floors, emery-resistant floors, water-milled floors, and even high-end millstone floors (inorganic and organic millstones). The industry of grinding machine is not concentrated which from the industry of structure, there have multinational companies to private company. Before the Coronavirus outbreak, hundreds and millions of floor polished machine organizations who even are small and medium-size enterprises that have strongly competitive. After this virus, there still have existed but powerful enterprises. The pressure of competition will not decrease as the amount of floor enterprises are declining, but the competition will be stronger than ever. Geographically speaking, North America is the largest floor consumer market, and China is the world's largest production market. North America and Europe are closely followed. This three markets share more than 70% of the global production market. North America is the region with the largest output value of the floors industry, and the most developed region in the world. With the development of the industrial level, high-precision floor grinding machines have an indispensable role in the construction of factories. The growth of economy is paused which is not stop the construction industry to moving. The rapid urbanization and industrialization process in the Asia-Pacific region makes the Asia-Pacific region expected to lead the global floor grinder market. With the entire market of controlling to eco-friendly, health, which leading to high orders; in the construction industry and industry around the world, and in the process of urbanization and modernization in countries around the world, the simple construction, environmental protection, strong and wear-resistant, inexpensive and high-quality floor is the most effective. The extensive use of the floor in all different areas of life makes market for ping grinders is constantly evolving. Artificial intelligence is at the gate of the intelligent era. If you don’t want to be in the era, you must walk in the front of era. AI integration is the key to next era of door opening. After developing remote control products and realizing manual remote control that floor companies have turned their attention to unmanned intelligent robot systems in an effort to achieve "one person, multiple machines". The fate of the market is inseparable from the flooring industry. The recovery of the globa...

• January 09, 2020

Diamond Tools For Surface Preparation Commonly used concrete abrasive pads include the following: Polycrystalline diamond (PCD) grinding pads : used to remove epoxy coatings, which need to be used when the coating is relatively thick; Concrete diamond grinding shoes : used for leveling concrete floors and refurbishing old floors; Thick concrete grinding plate : usually refers to diamond resin grinding plate with a thickness of 5mm or more, used for leveling, rough grinding, fine grinding, fine grinding and polishing of concrete floors; Thin concrete grinding discs : usually refers to diamond resin soft grinding discs with a thickness of less than 5mm, used for rough grinding, fine grinding, fine grinding and polishing of concrete floors Concrete polishing pads : usually synthetic fiber, wool or other animal hair is bonded and mixed, and some products also add some abrasives and polishing accessories for polishing the concrete floor.

• January 07, 2020

Dusty concrete floors are one of the most common problems in flooring industrial, and it's also an urgent problem needed to be solved.Because there may be some bad effects: low work efficiency; untidy and unsightly working environment; difficult to clean; High maintenance costs and more. Therefore, it is imperative to cure and seal this kind of floor. So how to seal a dusty concrete? Is it just to penetrate the curing agent directly on floor surface to curing the concrete? Step 1 - Preparation Remove all loose material as much as possible. The way to doing this is to use a diamond floor grinder to coarse grind and level the floor surface to  a even and flat one. Step 2 - Curing and Hardening I think this next point is really the most important… Use the concrete penetrating liquid hardener densifier EC-1008 to infiltrate and harden the concrete. Its professional chemically active substance can penetrate the concrete surface and react with free calcium oxide and other substances to form Calcium silicate hydrate (CSH), which greatly improves the strength and hardness of concrete; Step 3 - Fine Grinding and Fine Polishing Grind and polish by using a planetary concrete floor grinding machine and a high speed floor polisher to form a high-density, high-brightness, high-hardness concrete solidified floor. Duringthis process, applying concrete protective sealer to fine polishing, the effect will be better. Therefore, the cooperation use of floor grinding machine and floor surface treatment Chemicals is required, so that the effect obtained after concrete floor is cured will be better and more durable.

• January 03, 2020

The concrete floor grinder is a  specifically design to grind the concrete floor. It can grind, level, and polish the floor, so that the coatings and loose layers on the floor surface can be removed. However, the actual concrete floor conditions are different, it can be soft,or hard, or ash, or damage, or uneven etc. If you encounter an extremely hard floor, even the floor grinding machine can't cut it off, what should we do at this time? 1. Change the small one to a large concrete grinder or put an extra weight on it to increase the grinding pressure 2. Use soft bond grinding pads,or sharper abrasives diamond grinding discs, or low grit of concrete grinding plates. 3. Reduce the rotation speed and forward speed of the floor grinder. 4. Wet the concrete surface, or use wet grinding. Whether it is a floor grinder, or diamond abrasive grinding pads or other concrete grinding materials, it is necessary to choose the appropriate one according to the floor conditions, so as to facilitate the floor construction.

• December 23, 2019

For those who are new in concrete polished flooring, they often carry out the construction work with previous experience. Some of them may ask if the concrete hardener densifier can be directly mixed in the concrete and used in the next process.If it's ok may save lots of manpower. But what we would like to tell you is that it is not feasible to use concrete densifier by mixing with concrete. From its working principle, the concrete sealer curing agent reacts with the calcium and magnesium ions in the concrete through infiltration to make the concrete denser and harder. In terms of construction conditions, generally speaking, after rebuilding the floor ground, the process of concrete hardening won't be carried out until after 7-14 days of water conservation. From an economic point of view, this is not a good deal. If this conjecture can come true, how much concrete sealer densifier we need to invest to make an equivalent solidified floor? According to normal construction, we just apply concrete hardening curing agent to its surface and get a dense hardened concrete surface. If it is directly stirred, what proportion of concrete sealer hardener need to be added in order to ensure quality of floor finished?There is no answers. In conclusion,it's impossible to mix concrete hardener and concrete up together to use.

• December 19, 2019

Recent years, with the popularity of polished concrete floorings, the application of decorative concrete has become more and more widespread and been applied to various fields. For colored flooring,we have two diffierent type: epoxy floors and concrete dyeing floors.The performace and applications of these two types are different. So, what is the difference between a concrete dyeing floor and an epoxy floor? Analysis from abrasion resistance part,epoxy flooring is directly painted on the surface with epoxy paint on the basis of the original floor. Although it can protect the floor, but it is a coating on floor surface, especially after heavy pressure and poor maintenance, peeling and other phenomena will occur over time. Overall, the wearing resistance is not as good as the concrete dyeing flooring. The concrete dyeing floor is a permeation dyeing process to the cured concrete floor with concrete dyeing agent, instead of forming a coating. It can be said that it has almost the same life as the cured floor,with excellent abrasion resistance. As for appearance,since the epoxy floor is a coating directly formed on the floor surface, the color is more uniform and more diverse, which can cover some defects of the floor surface. In addition, the concrete dyeing flooring is dyeing with dyeing agent to concrete floor. The concrere dying agent penetrates into the floor, Whether the color is even or not has been influenced by the base of the flooring. The base of the floor is different from place to place. Loose floor surface will absorb more dyeing agents, and denser floors will absorb less agents，resulting in that the color is less uniform than epoxy flooring.