• 2021-09-17

What are the grinding methods of floor grinders? In floor construction, different floor grinding machinery and equipment, different floor construction conditions, and different grinding processes, floor grinding machines should use different grinding operation methods, because the correct application of machine operation methods can not only improve the construction Efficiency will also improve construction standards. 1. Straight line operation mode The floor grinder using this operation mode can greatly improve work efficiency in the later polishing process of soft ground. 2. Cross-polishing operation mode Floor grinders using this operation mode can improve the flatness of the construction ground. 3. Fan-shaped swing operation mode The floor grinder using this operation mode can improve the work efficiency of drop leveling. Therefore, according to different grounds, different needs of customers, and different processes and procedures, it is appropriate to choose the corresponding operating mode for the floor grinder.

• 2021-09-14

The advantages and disadvantages of epoxy floor In many large buildings, such as shopping malls, parking lots, factories and other areas, the ground is large. If you choose to lay tiles on the ground, it will be a large-scale project, and for many businesses , The cost of laying ceramic tiles is relatively high, and it also needs frequent maintenance, which is not cost-effective. Therefore, more and more epoxy floors are beginning to choose, such as epoxy self-leveling floors, which are very suitable for large-area floor laying. So what are the advantages and disadvantages of epoxy floor? 1. The advantages of epoxy floor The main advantage of epoxy floor is that it is easy to clean. Because its surface is smooth and there are no ground joints, etc., it can be cleaned with a special cleaning vehicle or a large mop used in shopping malls when cleaning. It is efficient and needs to be cleaned. Clean it once or twice and it will look as clean as new. At the same time, epoxy floor also has good corrosion resistance, etc., so it can be used in many large buildings. Of course, the price of epoxy floor is not high. If you want to know the details, you can directly consult Xiudi. 2. Disadvantages of epoxy floor The disadvantage of epoxy floor is that it is relatively troublesome when laying, and there are many construction steps, but if you can find a good construction team, this trouble can be solved. It is suggested that you can consider us. As a floor with rich experience, it can provide you with a comfortable guarantee from the supply of materials to the laying of the ground to the good service.

• 2021-09-10

Did you choose the right industrial vacuum cleaner? when we choose a vacuum cleaner, we must choose a good one, especially when we use industrial vacuum cleaners in factories, we need to pay attention to: Specification model According to the specific situation and the site of its own application, it is necessary to do a good job in the selection of specifications and models. For example, the adsorption capacity, specifications, working voltage, and output power of industrial vacuum cleaners must be mastered, and they must also listen to the detailed introduction of the manufacturer to select the suitable product. Actual operation The actual operation flexibility is the idea of choosing a vacuum cleaner. It is too inconvenient to endanger the work efficiency during the operation process, and it is not easy for the actual operation to fail to achieve the specific actual effect. Therefore, the actual operation of the finished product must be distinguished. Ability to work The pros and cons of the filtering capacity are the key main parameters to distinguish the vacuum cleaner. Generally, the higher the filtering capacity of the equipment, the price is very high, and the better the features, the better the choice. Versatility Vacuum cleaners can be divided into household vacuum cleaners, commercial vacuum cleaners and industrial vacuum cleaners. There are quite big differences among the three. When purchasing, you should choose the suitable vacuum cleaner according to your specific main purpose.

• 2021-09-08

The difference between floor grinding machine with or without inverter drive There are many types of grinders on the market, and the driving grinders are also divided into two types with inverter and without an inverter. Next, Xingyi will take you to understand the difference between the next two types of drives. The drive grinder without an inverter can be started instantly, but it only grinds at a fixed speed, which may cause the ground grinding time to be too short and require repeated grinding. Manual troubleshooting is required in terms of maintenance. The inverter drive grinding machine can control the current to adjust the speed of the grinding disc, and adjust the speed according to the process required for grinding. The inverter can send out a fault alarm when the machine has a circuit failure or overload to protect the machine and reduce damage. Driven grinders with inverter make it easier to troubleshoot equipment and maintain them. Fujian Xingyi is a professional floor grinder expert, producing various types of floor grinders. Here you can find satisfactory floor grinders.

• 2021-09-04

What are the steps for wood floor polishing and renovation? Before polishing and refurbishing wooden floors, many people would like to know what are the steps for polishing and refurbishing wooden floors, so that they can be polished and refurbished faster and better. Wood floor polishing and renovation steps: 1. First, find a professional floor polishing and refurbishing machine, and perform several polishing to remove the paint layer and the surface layer. The wooden layer is about 0.5 mm to make the floor surface more delicate and smooth to a new state. For the corners of the floor, use small The sanding machine is used for sanding to achieve an overall smooth effect. 2. Seal the original side seams again, then seal the whole floor with primer and let it dry slowly. 3. After the primer is dry, apply the topcoat for the first time and wait for it to dry. 4. Grind the surface carefully with sandpaper, grind the surface until it is rough, and remove the powder on the surface. 5. Brush the topcoat three to four times in accordance with the above procedure, and no grinding is necessary for the latter time. 6. After the top coat is completely dry, apply the floor wax.

• 2021-08-27

How to deal with the different abrasive wear of floor grinders in floor construction? After the floor construction, the floor grinder needs to be maintained and repaired frequently to avoid machine failure during construction without knowing it. In addition, any problems arising from the floor grinder during floor construction must be dealt with in time, otherwise, it will affect the resulting ground effect. The difference in abrasive wear is also a problem that needs attention. Learn to judge and deal with it. Whether the abrasive wear of the machine is different can be judged from these points: ①The buffer rubber is aging or damaged; ②The grinding disc is not in the same working plane; ③The buffer spring is damaged. According to the construction practice and technical experience of Xingyi Machinery, these two methods can be adopted to solve the problem: ①Replace the cushion rubber pad; ②Adjust the fastening bolts to keep the grinding disc on the same plane. Xingyi is a manufacturer specializing in the production of floor grinding machinery. After more than ten years of development, it has established a complete sales and service system. In addition to a wealth of product categories, it also has professional technical guidance capabilities, which can provide customers in construction Help and guidance.

• 2021-06-25

Selection and use of grinding discs In floor construction, the grinder applies pressure to the ground through the grinding disc, and rotates and rubs the ground to achieve the grinding effect. The correct use and maintenance of grinding discs can reduce costs. The number of teeth of the grinding disc determines the cutting force of the grinding disc on the ground. The more the number of teeth, the less the pressure on the ground, which makes it difficult to cut the ground. When facing hard ground, it is better to choose a metal grinding disc with a small number of teeth and a low mesh number. The grinding floor is made by rubbing the ground with grinding discs to produce scratches, using different grinding discs to repeatedly grind, and continuously covering with finer scratches to achieve the smoothing effect. Each stage of grinding has a corresponding grinding disc number segment, and each number segment aims to suppress the scratches of the previous number segment. Using grinding discs across processes may damage the ground and damage the grinding discs. Clean the grinding disc in time after use. Dust or curing agent agglomeration will be stuck in the gap of the grinding disc. If it is not cleaned, the ground may be scratched and the grinding disc will be damaged when it is used next time. It will also make the hook cloth not sticky.

• 2021-06-11

How to apply concrete protective agents? The concrete protective agent is one of the agents used in the construction of the platinum crystal floor system. It is used in conjunction with the floor polisher during the floor polishing process. It can form a glazed protective layer on the concrete surface to increase the density of the concrete surface, Reduce the permeability of the concrete surface, increase the gloss and wear resistance of the concrete surface, and improve the texture of the concrete surface. Moreover, the cured floor polished by the concrete protector will be easier and more convenient to clean in the later stage, just need clean water and mop. Concrete protection construction: Choose equipment and accessories: floor polishing machine, high-speed polishing pad. Instructions: 1. Shake the container before use to make it even and then use. 2. Brush FB-2001 on the ground concrete surface with a roller brush, and then use a floor polishing machine to polish the concrete surface cleanly and evenly. 3. 1-2 times of this process is enough. In addition to the production and sales of floor grinding machinery, Xingyi Machinery can also provide customers with professional floor technical guidance. If you have any doubts about floor construction, please consult.