• February 01, 2016

What is polished concrete? Polishing concrete is similar to sanding wood. Using progressively finer grits of diamond impregnated segments or disks, similar to sandpaper, the concrete is steadily ground down to the desired degree of polish. A polished concrete floor has a sleek, reflective finish to it. The reflectivity of the floor, as well as the color, patterns and designs of the floor can be co...

• February 19, 2016

It is thus important to know how to polish them yourself. Several video tutorials are available online from where one can learn about the Do It Yourself exercises on cleaning, polishing and restoring of concrete and marble floors. Taking couple of hours off on a weekend to get this done can make the floor tiles always look like new ones. The online tutorials will depict the use of certain customiz...

• February 26, 2016

Of all the natural stones that you can choose for flooring granite is by far the hardest material and the most hardwearing. It is also resistant to staining and acid and alkaline chemicals. This is the reason it is the kitchen worktop of choice and the flooring material of choice. Despite its hardness it is still capable of being scratched by quartz. Quartz is sand like material which makes up the...

• July 21, 2016

What is the epoxy terrazzo? Epoxy terrazzo floor is a kind of high performance decorative artistic floor which shows the unique modern urban construction style. This floor selects many kinds of special stone, or other suitable decorative aggregates and the high polymer resins to mix, and then paving, hardening and grinding to construct the special projects. Where will you use the epoxy t...

• July 22, 2016

Xingyi 2 projects managers provide technical guidance for concrete and granite polishing in Brunei projects. Our Brunei customer is very satisfied with the floor effect. The concrete grinding process: Step 1:Metal diamond pads 30#60#120#; Step 2:Resin diamond pads 50#100#; Step 3:Surface cleaning&repairing with concrete repairing adhesive(had better wait for 12-24 hours after the adhesive); St...

• August 05, 2016

The terrazzo floor is the gorgeous art from the flooring tradition. However, there exist the shortcomings for the terrazzo floor: first of all, easy dusting and ash; secondly, not dense enough, not resistant to dirt and not anti-oil; thirdly, not bright enough, so the development of terrazzo floor is limited.      Now, there is the perfect solution -- concrete hardening agent, it wi...

• September 05, 2016

   Etiquette is the way and process to show the with the conventional self-restraint and respect, including the appearance and manners, dressing, talking, communication and so on.     Xingyi Polishing Machine Co.,Ltd not only devotes itself to the floor grinding machine, diamond pads and concrete hardening agent, also focus on the service for every customer. The first step to s...

• September 09, 2016

Mistake 1: One kind of concrete densifier will solve all problems for all hardening flooring According to the degree of density, flatness, concrete grade, the different aggregate for the concrete base, and different requirements for the technology of little stone appearance degree, cement grouting saving, concrete surface glazing and highlight, it should select different kings and models concrete ...

• September 20, 2016

  Xingyi devotes itself to not only the high quality products, also the professional service.     Before the terrible typhoon Meranti, there are the intense competitions for the stone caring and concrete grinding and polishing among Xingyi sales team.   From the floor condition measure, including the floor flatness, hardness, intensity and brightness testing, then the metal pad...

• October 10, 2016

1.Finished good protaction 2.Cutting the jionts(to clean joints) Tools: stone cutting machine, cutting blade, floor shove/knife,brush Note: a.Control well as the cutting route may go deviation. Go in straigh line and mive foeward. b.Using dustless cutting machine as the dust can prevent your sight for the cutting route. c.Cutting in 3-5mm thickness. d.After cutting the joints, use knife to dig out...

• August 16, 2019

Have you ever feel angry due to buy some unqualified and full of some holes and cracks marbles?  Do you hate seeing old,worn-out marble floors? Now you won't be annoyed about those things any more.We will tell you how to repair dilapidated marble. And do you know why there is some bubbles appear on the slab?Because it has just been cut out and there still have water and ai...