1.Stone dirty clearance is very perfect for cleaning stains on the stone surface and preventing the floor surface from the stains for a long time.
2.Water stone dirty clearance chemicals--Good effects to remove stains many kinds of stains on the stone surface.
1, Clean the floor to remove stains on the floor
2, Make sure he floor is free from stains and dirt
3, Wash the floor with the mop and clean water thoroughly ,making sure there is no residueof stripper on the floor .
4, Mix 2 to 3 tablespoonful of chemical and 150 to 250 ml of water, then spray directly on the marble floor
5, Place a low speed (175rpm to 300rpm) floor polisher with red polishing pad to do polishing.
6, Keep the floor surface wet by adding 100 to 150ml water regularly.
7, Using a floor squeegee ,inspect the area being crystallized after 4 to 5 minutes and check if the marble has reacted.
8, If the marble exhibits a wet look gloss, then transfer the used mixing chemical on close untreated area by using the floor squeegee.
9, Wash the finished area well with mop and clean water .
10.After the entire floor has been crystallized ,damp mop to scrub the floor(with a clean red pad) and clean water and let it dry .
11,Remove the remaining marble crystalizer powder residue from the floor by dry buffing pad .